Locker-z Forum

ecco una guida in inglese,proveniente da psgroove,che mostra attraverso immagini e corrette spiegazioni come accedere al psn con il cfw 3.55,come vi avevo anticipato ├¿ un metodo molto macchinoso,ma ├¿ comprensibile attraverso le facili immagini. Occorrente: PS3 3.55 Kmeaw Charles Web Debugging Proxy Comgenie's Awesome File Manager Version 0.6 AsBestOS installer 1.5 (tranquilli,non metteremo linux su ps3 ) Dnsmasq o altro dns che supporti un reindirizzamento di ID Si comincia: SPOILER ( clicca per visualizzare ) 1. Install Charles Web Debugging proxy and patch it to full version. 2. Run Charles Web Debuggign proxy and make the fallowing confs depending your region: EU: fuk01.ps3.update.playstation.net and auth.np.ac.playstation.net AU: fau01.ps3.update.playstation.net and auth.np.ac.playstation.net US: fus01.ps3.update.playstation.net and auth.np.ac.playstation.net UK: fuk01.ps3.update.playstation.net and auth.np.ac.playstation.net Proxy -> Reverse ProxiesÔǪ: Add those two hosts to Charles depending your Region like shown on screenshots. Immagine1 Immagine2 Immagine3 Tools -> Map LocalÔǪ: Add mapping to local file like shown on screenshots and select the correct ÔÇ£HostÔÇØ depending your region. Path: /update/ps3/list/eu/ps3-updatelist.txt Download the text file above here Immagine4 Immagine5 Tools -> Rewrite; Add rewriting rules like this: Locations: Name: PS3 version spoofer Locations: Protocol: https, HOST: auth.np.ac.playstation.net, Path: /nav/auth Rules: Type: Modify Header Where: Request Match, Name: X-Platform-Version Match, Value: PS3 03.55 Replace, Name: X-Platform-Version Replace, Value: PS3 03.56 Replace All Immagine6 Immagine7 Immagine8 Proxy -> Proxy Settings: Add the ÔÇ£auth.np.ac.playstation.netÔÇØ to the ÔÇ£LocationsÔÇØ list so you can see itÔÇÖs working. Immagine9 Immagine10 Disable IE and firefox proxy so you wonÔÇÖt get your computer traffic shown Immagine11 Immagine12 Tips for Charles: - Make sure 80/443 ports are free(not used by any other program) and Charles can listen to them. - Allow access to Charles from your software firewall if you have any. - Check if you have: Proxy -> Recording (Session 1) enabled, if not enable it Proxy -> Start Recording - When you try to connect first time to PSN, Charles will prompt if you wanÔÇÖt allow access from PS3 ip to Charles -> ALLOW! 3. Install dnsmasq to linux or configure dd-wrt/openwrt/tomato router to redirect hostnames to your lan ip If you donÔÇÖt know your lan ip, check it with ÔÇ£Command PromptÔÇØ: ipconfig /all, make sure itÔÇÖs configured as static from router if you have any. Windows method: Extract maradns-1-4-06-win32.zip EditÔÇØ mararcÔÇØ file to look like this: # Win32-specific MaraRC file; this makes a basic recursive DNS # server. ipv4_bind_addresses = ÔÇ£192.168.0.xxxÔÇØ recursive_acl = ÔÇ£192.168.0.0/24ÔÇØ timestamp_type = 2 # This is insecure until the secret.txt file is edited random_seed_file = ÔÇ£secret.txtÔÇØ # relay $ony domains csv2 = {} csv2["np.ac.playstation.net."] = ÔÇ£relay_auth.txtÔÇØ csv2["ps3.update.playstation.net."] = ÔÇ£relay_upd.txtÔÇØ # any real DNS servers will do upstream_servers = {} upstream_servers["."] = ÔÇ£8.8.8.8, 8.8.4.4ÔÇ│ Create ÔÇ£relay_auth.txtÔÇØ file, put this on it: auth.% 192.168.0.xxx ~ Create ÔÇ£relay_upd.txtÔÇØ file, put this on it: feu01.% 192.168.0.xxx ~ Create ÔÇ£secret.txtÔÇØ file, put this or anything longer then 16 chr on it: 243234234234234234asdfasdfasdw3erawer Run the: run_maradns.bat Debian/Ubuntu with root or sudo: apt-get install dnsmasq echo ÔÇ£address=/feu01.ps3.update.playstation.net/192.168.0.xxxÔÇØ >> /etc/dnsmasq.conf echo ÔÇ£address=/auth.np.ac.playstation.net/192.168.0.xxxÔÇØ >> /etc/dnsmasq.conf /etc/init.d/dnsmasq restart Configure Manually your PS3 network settings and select ÔÇ£ManualÔÇØ to DNS. Input your linux computer IP to Primary/Secondary DNS and save it. TIP: type command ÔÇ£ifconfigÔÇØ to terminal to find out your linux computer ip. Make sure itÔÇÖs static or itÔÇÖs made static from router DHCP so it wonÔÇÖt change. Router method (Tomato Web interface): Advanced -> DHCP / DNS Add those two lines to ÔÇ£Dnsmasq Custom configurationÔÇØ: address=/feu01.ps3.update.playstation.net/192.168.0.xxx address=/auth.np.ac.playstation.net/192.168.0.xxx Press save If you have OpenWrt/DD-WRT or something else, you must itself find how to add it to confs but it should be simple like with Tomato. Test with your windows that it will show like this: C:\> nslookup feu01.ps3.update.playstation.net Server: Address: 192.168.0.1 Name: feu01.ps3.update.playstation.net Address: 192.168.0.xxx C:\> nslookup auth.np.ac.playstation.net Server: Address: 192.168.0.1 Name: auth.np.ac.playstation.net Address: 192.168.0.xxx Since itÔÇÖs your router and you are using it too you must add those lines to: C:\Windows\System32\driveres\etc\hosts file: 199.108.4.73 auth.np.ac.playstation.net 193.184.164.160 feu01.ps3.update.playstation.net 93.158.110.154 fuk01.ps3.update.playstation.net 93.158.110.154 fus01.ps3.update.playstation.net 93.158.110.154 fau01.ps3.update.playstation.net DonÔÇÖt forget to remove ÔÇ£Read-onlyÔÇØ from that file so you can save it. TIP: No changes needed to PS3 since itÔÇÖs your router and DHCP will fix it. 4. Get a USB Stick and format it to FAT32. Copy needed files to USB Stick: AsbestOS installer (package53.pkg) ComgenieÔÇÖs Awesome Filemanager (ComgenieAwesomeFilemanager355.pkg) C:\Program Files (x86)\Charles\docs\charles-proxy-ssl-proxying-certificate.crt rename it to CA24.cer 5. Connect the USB Stick to your PS3. Install package53.pkg and ComgenieAwesomeFilemanager355.pkg 6. Run ÔÇ£AsbestOS installerÔÇØ and wait so you have access to dev_flash. 7. Start the ÔÇ£ComgenieÔÇÖs Awesome FilemanagerÔÇØ Press ÔÇ£Select button and screen will turn red and you have permission to all mounted partitions. Browse from Left screen to dev_usb000 with arrows and Press X Browse from Right screen to dev_rwflash -> data -> cert From left screen select your CA24.cer and press ÔÇ£OÔÇØ button to copy it to /dev_rwflash/data/cert/ Press the ÔÇ£StartÔÇØ button to copy it. TIPS: If you are smart you make new folder with L1 to USB Stick and backup the old CA24.cer to that folder before you overwrite it with your own. 8. Test login to PSN and see if you was enough guru to survive whole tutorial. tÔÇÖs should look like this after you connect to PSN on Charles, If not: - Shutdown PS3 from power switch and start it again and see if you have better luck - Restart Charles what is running on your computer - Restar router or /etc/init.d/dnsmasq restart - Read the tutorial again and double check you did everything correctly and selected servers what belongs to your region. - Did you press ALLOW on Charles when PS3 tried to connect at first time to your computer? Immagine13 By PSGROOVE La guida ├¿ un po complicata,basta pero seguire tutti i punti,avere una leggera conoscienza di inglese e una buona dose di pazienza